MIL-DTL-24560/5B(SH)
REQUIREMENTS:
DESIGN:
Electrical rating: 120 volts, 60 hertz, 180 watts.
Dimensions and configuration: See figures.
Enclosure: Splashproof (type I).
Parts: See table I.
First article:
Examination of product, magnetic permeability,
operation, insulation resistance, dielectric
withstanding voltage, vibration, shock, salt
spray, degree of enclosure.
GENERAL INFORMATION:
Military part numbers and general information are
as follows:
(a)
Military part number: M24560/5-001 - light assembly, symbol
191.2.
(b)
Weight: The weight of this light assembly shall be not greater
than 25.6 pounds.
NOTES:
1. Rotate upper lampholder sufficiently to stagger lamps with those
in lower lampholder.,
2. This space shall be packed with a caulking compound to provide a
weather and heat resistant splashproof seal.
3. Tower jam nut, M24560/5-013, shall have one flat side drilled
and tapped #6-32 UNC-2B, one hole.
4. Gasket, M24560/5-017, shall be cemented in place with seams left
open to permit the light to breathe.
5. Bolt, M24560/5-023 shall have end of thread upset slightly to
prevent removal.
6. Top assembly may be cast as one part in lieu of two pieces.
5