MIL-PRF-85676A(AS)
c. CS116 Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power
Leads, 10 KHz to 100 MHz.
d. RS103 Radiated Susceptibility, Electric Field, 2 MHz to 40 GHz.
3.14 Nomenclature, nameplate, marking, and decals. Nomenclature assignments and
nameplate approval for equipment identification shall be in accordance with MIL-DTL-18307.
Labeling shall be in accordance with MIL-STD-1472.
3.15 Interoperability & interchangeability. The lighting subassembly shall be tested to
determine compliance with the electrical and mechanical interface requirements of each specific
aircraft. Failure to comply shall result in redesign and retest in accordance with first article
inspection requirements (see 4.3). Parts and components of the lighting subassembly shall be
interchangeable or replaceable in accordance with MIL-I-8500.
3.16 Environmental stress screening. The control unit with integral power source shall
continue to function when subjected to the tests of 4.5.9.1 and 4.5.9.2.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. Development tests (see 4.2).
b. First article inspections (see 4.3).
c. Conformance inspections (see 4.4).
4.2 Development test program. The development test program shall include, as a
minimum, the tests specified in table I, unless otherwise specified in the contract for individual
escape exit components. The procuring activity reserves the right to witness developmental
testing.
4.3 First article inspection. First article inspection shall consist of the tests specified in
table I. The procuring activity reserves the right to witness all first article testing.
4.3.1 Samples. As soon as practicable after the award of either the contract or purchase
order, the manufacturer shall submit four lighting subassemblies for test. The samples shall be
of the same construction, workmanship, components, and materials to be used during production.
The first article inspection samples shall be furnished to the Government as specified in the
contract or purchase order (see 6.2.d).
4.4 Conformance inspections. Conformance inspections shall consist of the tests
specified in table I. The procuring activity reserves the right to witness conformance tests.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business