A-A-52418A
recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of
the Federal Acquisition Regulation (FAR).
4. Product conformance provisions.
4.1 Responsibility for inspection. The contractor is responsible for the performance of all
inspections (examinations and tests).
4.2 Contractor certification. The contractor shall certify and maintain substantiating evidence
that the product offered meets the salient characteristics of this CID and that the product
conforms to the producers own drawings, specifications, standards, and quality assurance
practices. Items with known defects shall not be submitted for Government acceptance. The
Government reserves the right to require proof of such conformance prior to the first delivery
and thereafter as may be otherwise provided for under the provisions of the contract.
5. Packaging. Preservation, packaging, packing, labeling, and marking for the desired level
shall be as specified in the contract (see 6.2).
6. Notes.
(This section contains information of a general or explanatory nature that may be helpful but is
not mandatory.)
6.1 Addresses for obtaining copies of referenced documents.
6.1.1 Non-Government publications. SAE J575 "Tests for Motor Vehicle Lighting Devices and
Components", SAE J576 "Plastic Materials for Use in Optical Parts Such as Lenses and
Reflectors of Motor Vehicle Lighting Devices", SAE J578 "Color Specification for Electric
Signal Lighting Devices", SAE J845 "360 Degree Warning Lamp for Authorized Emergency,
Maintenance and Service Vehicles", and SAE J1128 "Cable, Primary, Low Tension" are
available from Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA
15096 or www.sae.org.
6.2 Ordering data. Acquisition documents must specify the following:
a.
Title, number and date of this CID.
b.
If required, the specific issue of each document required (see 6.1).
c.
Type and class of warning light and PIN (see 1.1 and 6.3).
d.
Marking if other than as specified (see 2.5).
e.
Level of preservation, packaging, labeling, and marking (see 5).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business