A-A-52488
NOTE:
a. Construction is not limited to features other than as shown by dimensions, notations and referenced documents.
b. Use of an asterisk (*) indicates mandatory dimensions.
FIGURE 1. Spotlight nominal dimensions.
2. Connectors. The spotlight shall be provided with electrical connectors of the type and style specified in MS27142.
3. Switch. The spotlight shall be provided with an “ON-OFF” switch placed in a position where it can be operated without requiring the operator to remove his fingers from the handle.
4. Mounting bracket. When specified (see note b) the spotlight shall be furnished with a mounting bracket as specified in Army drawing 7015044 or a suitable interchangeable mounting kit which meets the requirements of this CID.
5. Lamp. The spotlight shall use a lamp which is rated at not less than 24 volts direct current (dc) at 5 amps, with a minimum rating of 50 watts.
6. Reflector. The spotlight shall use a parabolic aluminized reflector (PAR 46) with a nominal outside diameter of 5.75 inches.
7. Locking devices. Lockwashers, self-locking nuts, or other commercial locking devices shall be incorporated where required to prevent loosening of components.
c. Beam pattern. The spotlight shall produce a beam with a minimum intensity of 70,000 candlepower at a distance of 60 feet along the lamp axis when operated from a 28 volt direction current power source.
d. Spotlight head rotation. The minimum horizontal spotlight head rotation shall be 160 degrees left or right of the center of rotation.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business