A-A-52488
conform to an appropriate CARC paint system selected from Army drawing no. 12369000 for external application. Unless otherwise specified (see note b), the color of the paint final top coat shall be green no. 383.
QUALITY ASSURANCE PROVISIONS
a. Responsibility for inspection. The contractor is responsible for all inspections, including examinations and tests.
b. First article inspection. When specified (see note b), a first article sample shall be inspected to verify conformance to the salient characteristics in this CID. Approval of the first article sample by the Government shall not relieve the contractor of the obligation to supply items that are fully representative of those inspected as a first article sample.
c. Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producers’ own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace or that had successfully been delivered to the government on a previous contract or purchase order. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
PRESERVATION, PACKAGING, PACKING, LABELING, AND MARKING
Preservation, packaging, packing, labeling, and marking for the desired level shall be as specified in the contract or (see note b).
NOTES
(This section contains information of a general or explanatory nature that may be helpful but is not mandatory.)
a. Referenced documents. Copies of referenced documents are available from the following:
1. Military documents. Copies of MS27142 “Connector, Plug, Electrical-Pin Contact No. 12, 14 & 16 A.W.G., Waterproof” are available from the Navy Publication and Printing Service Office Standardization Documents Order Desk, Bldg 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.
2. Army drawing. Copies of Army drawing 12369000 “Chemical Agent Resistant Coatings (CARC) Paint Systems Index” and 7015044 “Kit, Spotlight Mounting” are available from the U.S. Army Tank-Automotive Command, Warren, MI 48397-5000.
3. Industry standard. Copies of SAE J575 “Test for Motor Vehicle Lightning Devices, Recommended Practices” are available from the Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001.
b. Ordering data. Acquisition documents must specify the following:
1. Title, number, and date of this CID.
2. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced.
3. PIN number and quantity required.
4. Final top coat color of paint, if other than specified.
5. Selection of applicable level and packaging requirements.
6. If spotlight is to be supplied with or without mounting bracket.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business