MIL-DTL-24560A(SH)
TABLE II.
Conformance examination.
Examine
Defect
VISUAL
Light assemblies
Finish not as specified; blisters,
Finish
peeled, chipped, or area of no film.
Color not as specified.
Materials not as specified.
Materials
Part missing; fractures, split,
Construction and workmanship
punctured, dented, deteriorated. Not
in proper alignment; sharp burr or
edge, sliver or splinter.
Missing, incomplete, burn holes,
Welding and brazing (where
cracked, fractured, or otherwise not
applicable)
fused; slag inclusion, slight undercut,
not smooth and uniform, scale of flux
deposits not removed.
Missing, not adherent or incomplete;
Soldering (where applicable)
not clean (flux or flux residue not
removed); not smooth (surface not
finished neatly), or pinholes in
solder.
Bolts, nuts, screws, studs, pads,
Missing, broken, stripped, fractured,
rivets, and other types of
loose, bent, not peened or
fasteners
insufficiently peened.
Electrical assembly (where
Connections at screw terminals not as
applicable)
specified. Wiring not properly joined,
loose at terminals.
Gaskets (where applicable)
Not coated where required; missing; not
as specified.
Marking for identification
Missing; incomplete, not legible.
Glassware
Construction and workmanship (may
Color not as specified; dead zones,
be combined with operation test
striea, air bubbles, wrinkles, mold
specified in 4.7.1.1)
marks, chipped edges, cracks or other
blemishes. Paint not as specified.
Bull's eye design for classes 1 and 3
not as specified. Refractive index not
as specified.
Missing; incomplete, not legible.
Marking for identification
WEIGHT AND DIMENSIONS (all)
Weight
Weight not as specified.
Dimensions not within specified
Dimensions
tolerances.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business