MIL-DTL-45068E
3.8 Workmanship. Workmanship shall be such as to assure a product free of burrs, scratches,
sharp edges, and chips (see 4.6.2).
4. VERIFICATION
4.1 Classification of inspections: The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.3).
b. Conformance inspections (see 4.4).
c. Control tests (see 4.5).
4.2 Inspection conditions. Unless otherwise specified herein, all inspections shall be conducted
under the following conditions:
a. Temperature 25 ± 10șC.
b. Relative humidity: Uncontrolled room ambient.
c. Atmospheric pressure: Site pressure.
4.2.1 Temperature stabilization. Except as otherwise specified herein or in referenced
specifications, test specimens shall be thermally stabilized for 1hour prior to being subjected to tests.
4.3 First article inspection. When first article is required (see 3.1), first article inspection shall
be performed on three first article samples. Unless otherwise specified (see 6.2), first articles samples
shall be inspected as specified in table I.
TABLE I. Classification of inspection.
First article sample
Conformance
Title
Requirement Inspection
Control
1
2
3
Examination
Tests
X
X
X
4.6.1
3.2 thru
Materials and
3.3.1.2,
construction
3.3.3, and
3.6
X
X
X
X
4.6.2
3.3 thru
Defects
3.3.3 and
3.6 thru
3.8
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business