INCH-POUND
MIL-DTL-58085C
20 DECEMBER 2012
SUPERSEDING
MIL-DTL-58085B
29 OCTOBER2007
DETAIL SPECIFICATION
LIGHT, BEACON, ANTI-COLLISION, AIRCRAFT
Inactive for new design after 31 July 2000
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. Scope
1.1 Scope. This specification covers an anti-collision light.
1.2 Classification. Lights shall be of the type as specified (see 6.2).
Type I -Connector located on bottom of unit, position "A" on figure 1
Type II -Connector located on side of unit, position "B" on figure 1
Type III -Connector unfastened; can be assembled as either Type I or Type II,
position "A" or "B" on figure 1.
1.3 Part or identification number (PIN). The PIN to be used for connector acquired
to this specification is created as follows:
M 58085-X
Type: 1- Type I - Connector located on bottom
2- Type II - Connector located on side of unit
3- Type III- Connector unfastened
Specification Number
Prefix for military specification
Comments, suggestions, or questions on this document should be addressed to Defense
Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616, or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online
database at https://assist.dla.mil/.
AMSC N/A
FSC 6220
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business