MIL-DTL-58085C
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AS25050
-Colors, Aeronautical Lights and Lighting Equipment,
General Requirements for
SAE AS31021
-Connector, Receptacle, Electric, Box mounting, Solder
contacts, AN Type
SAE-AMS-S-8802
-Sealing Compound, Temperature Resistant, Integral Fuel
Tanks and Fuel Cell Cavities, High Adhesion
(Copies of these documents are available from www.sae.org or the Society of
Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this
document and the reference cited herein, the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Design. Anti-collision beacon light shall be in accordance with figure 1 and
shall be as specified herein. Design shall permit adjustment or repair by personnel of
operating units and overhaul bases. Parts shall be built to withstand the strains, jars,
vibrations, and other conditions incident to shipping, storage, installation, and service.
Weight of the complete assembly shall not exceed 2 pounds and 4 ounces.
3.1.1 First article. If first article approval is required (see 6.2), approval and testing
shall be in accordance with 4.2. Approval of the first article shall not relieve the
contractor of his responsibility to furnish a product in accordance with this specification.
Any changes or deviations of the approved first article samples shall be subject to prior
approval of the contracting officer.
3.2 Material. Materials shall be as specified herein. All materials and components
shall be new and unused.
3.3 Construction.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business