MIL-DTL-14465 Lights, Composite, 24 Volts Direct Current \(Nominal\) VehicularThis specification covers two types of vehicular composite light assemblies each consisting of a service driving light, infrared driving light, blackout driving light, and a blackout marker light. The vehicular composite light assemblies are referred to herein as "light assemblies". The light assemblies are designed for use on military tracked vehicles equipped with nominal 24-volt \(V\) direct current \(dc\) electrical systems \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-DTL-14465F

10947046 -

Headlamp Assembly.

12360840 -

Lamp.

12360860 -

Lamp.

(Copies of these drawings are available from DAMI_STANDARDIZATION@conus.army.mil

or U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,

ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000.)

2.3 Non-Government publications. The following document(s) form a part of this

document to the extent specified herein. Unless otherwise specified, the issues of these

documents are those cited in the solicitation or contract (see 6.2).

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

ASTM B117

Standard Test Method of Salt Spray (Fog) Testing (DoD

Adopted).

ASTM G21

Standard Practice for Determining Resistance of Synthetic

Polymeric Materials to Fungi (DoD Adopted).

(Application for copies should be addressed to the American Society for Testing and Materials,

100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or www.astm.org.)

SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)

SAE J575

Test Methods and Equipment for Lighting Devices and

Components. For Use On Vehicles Less Than 2032 MM In

Overall Width (DoD Adopted).

SAE J578

Color Specification (DoD Adopted).

(Application for copies should be addressed to the Society Of Automotive Engineers, Inc., 400

Commonwealth Drive, Warrendale, PA 15096 or www.sae.org.)

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

ASME B1.1

Unified Inch Screw Threads (UN and UNR Thread Form)

(DoD Adopted).

(Application for copies should be addressed to the American Society of Mechanical Engineers,

345 East 47th Street, New York, NY 10017-2392 or www.asme.org.)

2.4 Order of precedence. In the event of a conflict between the text of this document and

the references cited herein, the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has

been obtained.